Giteki / TELEC certification for Bluetooth and Wi-Fi devices in Japan: what you need before you sell
Any product that transmits radio waves in Japan, including Bluetooth earbuds, smartwatches and Wi-Fi gadgets, must be certified to Japanese technical standards under the Radio Act and carry the Giteki mark. People often call it "TELEC certification" after one well-known certification body, but the legal system is technical conformity certification, overseen by the Ministry of Internal Affairs and Communications (MIC).

In short: no Giteki mark, no legal use in Japan
Bluetooth, Wi-Fi and similar low-power radio devices can be used in Japan without a licence only if they are certified to Japanese technical standards and carry the Giteki mark. Get certification, or build on radio modules already certified for Japan, before you ship units, send review samples or demo the product in Japan.
By Yuki Nojiri, CEO of Eifer, Inc. (Tokyo). Since 2019 Eifer has launched or supported 58+ overseas brands in Japan.
What is Giteki certification, and is it the same as TELEC?
"Giteki" is short for the Japanese term for technical conformity. The Giteki mark shows that a radio device meets the technical standards set under Japan's Radio Act. MIC says devices such as home and office Wi-Fi, Bluetooth devices, cordless phones and specified low-power transceivers can be used without a radio licence when they carry the mark.
The key point for brands: under the Radio Act, using a radio device in Japan is what is regulated. MIC warns that using a device without the mark may break the law, with penalties of up to one year of imprisonment or a fine of up to ¥1 million, and heavier penalties if it interferes with important public radio stations. So if you sell uncertified Bluetooth products in Japan, the people put at risk first are your customers. MIC also expects sellers, including online shops, to check the mark before they sell.
"TELEC" is a nickname. Japan has several registered certification bodies, and MIC also recognizes approved foreign bodies and foreign bodies registered under mutual recognition agreements, so some testing can be done outside Japan. What matters is that the body is on MIC's list.
This article is general information as of November 2026, not legal advice. Confirm your product's requirements with a registered certification body or MIC.
Which type of certification do you need?
| Technical conformity certification (per unit) | A registered certification body checks each individual unit and marks it. Anyone can apply. Suits small quantities, not mass production. |
|---|---|
| Construction type certification (design) | The body certifies the design and the quality-control method for production. The certified business then marks every unit it builds to that design. Manufacturers, sellers and importers can apply. This is the usual route for mass-produced consumer products. |
| Self-confirmation | Available only for certain categories of radio equipment with a low risk of interference. The manufacturer or importer confirms conformity itself and notifies MIC. |
| Duties after certification | Build to the certified design, keep inspection records for 10 years, and notify changes. Modifying a certified device cancels the certification, and the mark must be removed. |
Which products need Giteki in Japan?
If it sends a radio signal, assume it needs the mark until a certification body tells you otherwise. Typical consumer examples:
- Bluetooth speakers, earbuds and headphones. MIC states that they emit radio waves and need the mark.
- Wi-Fi devices, smart home products, routers and anything with a Wi-Fi chip.
- Wearables, trackers and AI devices with Bluetooth or Wi-Fi.
- Most drones. MIC notes the exceptions are those using very weak radio or infrared for very short distances, and some drones need a licence as well.
Devices that use only very weak radio below set limits, or only infrared, are outside the certification requirement. Devices with cellular connectivity also need telecom terminal approval, which is why Japanese phones carry two numbers. And some radio types, such as amateur radio, need a licence or registration even with the mark.
Unlike PSE, which is tied to the Japanese manufacturer or importer, construction type certification can be held by the manufacturer itself. A brand or its factory can get it once, and any Japanese partner can then sell the same certified product.
Can you use a certified Bluetooth or Wi-Fi module?
Yes, and for most hardware startups it is the fastest route. If the radio module inside your product already holds Japanese certification, the rules allow the maker or seller of the finished product to show the same marking (the mark and the certification number) on the outside of the product.
Three things to check:
- The module is certified for Japan, not just for the US or EU. Ask your supplier for the Japanese certification number and keep it in your compliance file.
- You use the module as certified. Certification covers the design that was assessed, so changes to the radio part, such as a different antenna, can take you outside it. Ask your certification body before you change anything.
- The marking is visible to the user. The rules allow the mark on the device, on the device's own screen, or for embedded devices on an external display, with instructions explaining how to show it.
MIC has been discussing more flexible display rules for products with little room for a label, such as showing the mark in a manual, on a website or by a 2D code. As of November 2026 these were still under discussion, so check the current rule before you design your labels.
Can you crowdfund or market a product before Giteki certification?
This is where overseas brands get caught. Japanese crowdfunding works as a pre-order sale, so a campaign can open before stock exists. But every unit you deliver to Japanese backers will be used in Japan, so it must be certified. Platforms also review pages before they go live, and certification is a natural question in that review. Confirm your platform's current requirements early.
Marketing creates its own risks:
- Review units sent to Japanese YouTubers or media are used in Japan. If they are uncertified, the use itself can be the problem, and the video can stay online for years.
- Live demos at events or pop-ups in Japan are use in Japan too.
- MIC runs a notification-based special scheme for using uncertified devices that meet certain foreign standards for experiments, tests and surveys, for up to 180 days. It is designed for technical work, not promotion, so do not plan a campaign around it. Ask MIC if you are unsure whether your use qualifies.
A safe order is: freeze the radio design, certify it, then send marked units to reviewers and open the campaign. If you must start marketing earlier, use footage filmed outside Japan and do not promise a delivery date you cannot meet.
What we check first with connected gadgets
Since 2019 we have launched or supported 58+ overseas brands in Japan. For anything connected, the radio is one of the first things we ask about, alongside PSE for the charger and the battery. The questions are short:
- Which radio modules are inside, and are they certified for Japan? What are the numbers?
- Who holds the certification: the module maker, the factory or the brand?
- Are any hardware changes planned before the Japan production run?
- Is there an AC adapter or a spare battery in the box (a PSE question)?
- Where will the mark be shown, and does the packaging need to change?
Our advice: have the answers to these ready in one document before you talk to a Japanese partner, so certification can be planned into the launch date instead of discovered late.
Giteki certification FAQ
Is FCC or CE certification valid in Japan?
No. Japan requires certification to its own technical standards. Some foreign bodies are recognized by MIC or registered under mutual recognition agreements, so testing can sometimes be arranged outside Japan.
Do Bluetooth earbuds need Giteki certification in Japan?
Yes. MIC states that Bluetooth speakers and earbuds emit radio waves and need the Giteki mark to be used in Japan without a licence.
Who holds the Giteki certification, the brand or the importer?
Construction type certification can be held by a manufacturer, seller or importer, so a brand or its factory can hold it. It is not tied to one Japanese importer the way the PSE notification is.
Can I use a product without Giteki at a trade show in Japan?
Use in Japan generally requires the mark. MIC's special scheme for experiments, tests and surveys allows limited use of uncertified devices by notification for up to 180 days; check with MIC whether your use qualifies.
What happens if we change the radio design after certification?
Changes must be notified, and a device modified outside its certified design loses its certification. Talk to your certification body before changing the radio part.
Related articles

Bringing a Kickstarter or Indiegogo product to Japan: what transfers and what doesn't
Why backer numbers don't carry over, Japanese crowdfunding as step two, and what a Japanese partner will ask you
Read the article →
PSE certification in Japan: diamond vs circle PSE, who files, and how long it takes
Which products need PSE, who is legally responsible, what lithium-ion batteries need, and where it fits a launch
Read the article →
How to test Japanese demand before you commit to Japan
A small ad test, a sign-up list and a pre-order campaign tell you more than a market report
Read the article →Planning to bring a Bluetooth or Wi-Fi product to Japan?
Tell us which radio modules are inside and what you have certified so far. On a 30-minute call we will tell you what we expect Japan to require and how we would sequence certification, review units and the launch.
- Minimal upfront cost for your brand
- The form takes about 2 minutes
- We reply within 3 business days